DancesWithDinosaurs
New Member
Just keep in mind, you want the tort to have an option to move to and from heat. So try to keep one end with the ability to be a bit cooler. Think 3 little bears.Great job.
This is the hardest part, staring at an empty enclosure! I just did it myself. Longest month ever! Lol
I'm not surprised that you have low temps in that long of an enclosure. If it were me, I'd set up 3 CHEs. One in the middle, one on each end and then I'd plug all 3 into a single thermostat. This will dispense the heat, evenly over a greater area.
If you had a single heat source, it would have to get much hotter at the source for the heat to reach the far ends. You could end up with 80° corners and a 120° center.