Mold

TheLastGreen

Well-Known Member
Joined
Aug 3, 2021
Messages
890
Location (City and/or State)
Johannesburg
I'm highly fustrated. Today when I inspected the soil, I found some mif, on the substrate, some microscopic shrooms. I checked through the substrate and beneath it was an entire layer of mif, which I didn't see. (This was in my hingeback enclosure, only beneath the humid hide and cool area, any advice to stop it, I have read some members poor water over the substrate and no harm came from it?)
All the bark was removed and steralized by being placed in boiling water for a few minutes and then being cooled down, the floor of the enosure has been cleaned aswell
Any advice?
 

ZenHerper

Well-Known Member
Joined
Feb 27, 2020
Messages
2,080
Location (City and/or State)
New Jersey
If you have access to a good-quality aquarium salt...mix by the label instructions and apply it lightly to the mold/shroom colonies. Aquarium salt is a balanced brackish compound...I'm not sure how I'd dilute table salt (which is pure NaCl) or marine brine...
 
Top