Defishnsea
New Member
It's getting hot and dry in southeast Louisiana. I find it difficult some days to have the time in the morning to water down the enclosure. This was my solution. Two pieces of 3/4 PVC, a 12 pack of mister landscape mist nozzles and a slip on PVC hose adapter. A PVC elbow, end cap and tie downs were also used. The mist nozzles have to be purchased at lowes since Home Depot doesn't carry them. Cut the PVC to the length you need, then hold them side by side on a flat surface and draw a line down one using the other for support. This will give you a straight line to drill the holes for the mist nozzles. Use a 5/32 drill bit and drill holes where you want them, insert nozzles. Lay parts out in the necessary arrangement and glue with PVC glue. I also use a timer at the hose bib to turn on automatically. I only leave it on for two minutes and it wets it down plenty. Hope this helps others.
Matt
Matt