Cleopatra 2020
Well-Known Member
Just got a 150w che which I'm installing in an closed encloser....the tote is 39L x 19W x 20H so I'm assuming about 50+ gal...I'm using a plywood lid that I've put a 10" square pattern of foil tape on the bottom side where the che is poking thru in the middle and hangs a good 4-5 inches under the lid while the socket is positioned halh way in the hole...what I'm wondering is should I use a dimmer switch to controll the heat so it's not too hot.....and does anyone use this method and how well does it control the heat....the che guide said 150w che should be used for 50 gallon enclosure or bigger....but it gets really hot in there100°+... if a dimmer is safe enough to use I will try that route maybe even get a thermostat if doable any suggestions? Picture of the tote attached