New Leopard Enclosure

Coconikki

Member
Joined
Jan 23, 2023
Messages
37
Location (City and/or State)
Sioux Falls, SD
I am assembling an enclosed PVC 48X24X24 enclosure for my Leopard tortoise arriving next week. I have a few questions..
I purchased a radiant heat panel, but now I am unsure of how to set it up with a basking spot. Should I use a basking spot still?
will it be too hot? Or should I just use the heat panel at night and the basking spot during the day?
I am also unsure of my UVB percentage and length for my size enclosure.
I have printed and read the care sheet posted but still unsure of placements of the above.

Does anyone have a similar set up with a photo?
 

Tom

The Dog Trainer
10 Year Member!
Platinum Tortoise Club
Joined
Jan 9, 2010
Messages
63,483
Location (City and/or State)
Southern California
Put the RHP roughly in the middle so it can warm the whole enclosure. Put the basking lamp and UVB over to one side near each other. Ambient lighting should be spaced to light up the entire enclosure.
Here is a breakdown of the four heating and lighting essentials:
  1. Basking bulb. I use 65 watt incandescent floods from the hardware store. Some people will need bigger, or smaller wattage bulbs. Let your thermometer be your guide. I run them on a timer for about 12 hours and adjust the height to get the correct basking temp under them. I also like to use a flat rock of some sort directly under the bulb. You need to check the temp with a thermometer directly under the bulb and get it to around 95-100F (36-37C).
  2. Ambient heat maintenance. I use ceramic heating elements or radiant heat panels set on thermostats to maintain ambient above 80 degrees day and night for tropical species. In most cases you'd only need day heat for a temperate species like Testudo or DT, as long as your house stays above 60F (15-16C) at night. Some people in colder climates or with larger enclosures will need multiple CHEs or RHPs to spread out enough heat.
  3. Ambient light. I use LEDs for this purpose. Something in the 5000-6500K color range will look the best. Most bulbs at the store are in the 2500K range and they look yellowish. Strip or screw-in LED bulb types are both fine.
  4. UV. If you can get your tortoise outside for an hour 2 or 3 times a week, you won't need indoor UV. In colder climates, get one of the newer HO type fluorescent tubes. Which type will depend on mounting height. 5.0 bulbs make almost no UV. I like the 12% HO bulbs from Arcadia. You need a meter to check this: https://www.solarmeter.com/model65.html A good UV bulb only needs to run for 2-3 hours mid day. You need the basking bulb and the ambient lighting to be on at least 12 hours a day.
 

Coconikki

Member
Joined
Jan 23, 2023
Messages
37
Location (City and/or State)
Sioux Falls, SD
Put the RHP roughly in the middle so it can warm the whole enclosure. Put the basking lamp and UVB over to one side near each other. Ambient lighting should be spaced to light up the entire enclosure.
Here is a breakdown of the four heating and lighting essentials:
  1. Basking bulb. I use 65 watt incandescent floods from the hardware store. Some people will need bigger, or smaller wattage bulbs. Let your thermometer be your guide. I run them on a timer for about 12 hours and adjust the height to get the correct basking temp under them. I also like to use a flat rock of some sort directly under the bulb. You need to check the temp with a thermometer directly under the bulb and get it to around 95-100F (36-37C).
  2. Ambient heat maintenance. I use ceramic heating elements or radiant heat panels set on thermostats to maintain ambient above 80 degrees day and night for tropical species. In most cases you'd only need day heat for a temperate species like Testudo or DT, as long as your house stays above 60F (15-16C) at night. Some people in colder climates or with larger enclosures will need multiple CHEs or RHPs to spread out enough heat.
  3. Ambient light. I use LEDs for this purpose. Something in the 5000-6500K color range will look the best. Most bulbs at the store are in the 2500K range and they look yellowish. Strip or screw-in LED bulb types are both fine.
  4. UV. If you can get your tortoise outside for an hour 2 or 3 times a week, you won't need indoor UV. In colder climates, get one of the newer HO type fluorescent tubes. Which type will depend on mounting height. 5.0 bulbs make almost no UV. I like the 12% HO bulbs from Arcadia. You need a meter to check this: https://www.solarmeter.com/model65.html A good UV bulb only needs to run for 2-3 hours mid day. You need the basking bulb and the ambient lighting to be on at least 12 hours a day.
Thank you, Tom!
 

TammyJ

Well-Known Member
5 Year Member
Joined
Jun 21, 2016
Messages
7,260
Location (City and/or State)
Jamaica
Some pictures of the setup and tortoise when you get him would be nice! Good luck.
 
Top