COLD DARK ROOM

CarolM

Well-Known Member
5 Year Member
Joined
Oct 30, 2017
Messages
19,492
Location (City and/or State)
South Africa - Cape Town
Hello, Lyn, lovely to see you back. :):<3:
You have lots to catch up on, but i'm sure you will be brought up to speed by the Roommates.
I am taking one of my little breaks from the forum but shall return shortly, one supposes.
I hope Lola has been enjoying your wonderful bank holiday weather.
Thunderstorms and rain here. :(
Your last message was the day before I returned to the Cold Dark Room last year, so I hope i didn't scare you off.
Take care and hope to speak soon.
Love,
Adam .:<3:

Hi Adam. Nice to see you, even if it is only for a thread. Missing you and Hope to see you soon again.
 
N

no one

Guest
Just poppin' in to say it is good to see you back online Adam. I noticed I hadn't seen you for a while and was worried something was wrong with you. Now I know you are ok!

Have a nice one every one... Be gentle with the hedgehogs. Bye bye
 

DE42

Well-Known Member
Joined
Apr 8, 2016
Messages
1,697
Hi Dan, I found some pics on google of my device. Thanks I really appreciate your help. The instruction manual that came with it is terrible. But I also think that I might need to get one of those multiple connection points. Something like this maybe.

images


or this:
images


This is what the picture on the thermostat looks like:

624024713_500.jpg


I have the white wiring which was connected to the power plug coonected to no. 3 and 4. Then the sensor wiring connected to no. 5 and 6. And then the CHE wire (I had to cut off the two prong plug and then take the Blue wire and connect it to No 1 and the brown wire to no. 2 (on my device no 1 is marked as L and no. 2 is marked as N) Then I took another piece of white wire and connected from no. 3 to 1 and from 4 to 2. This had the CHE coming on and heating up, but then it kept on tripping my plugs. So I am not sure if it was because I connected it wrong or if it was using to much power. Should I get another blue and brown wire and connect them to no. 2 to 4 (Brown) and then 1 to 3 (Blue wiring)?

The Website has the following info on it, I hope you can understand it:

View attachment 237996

View attachment 237997

When I tried to change the differential to 01.00 instead of the factory setting of 05.00 that is when it started tripping my plug. The reason why I tried changing the differntial was because when the temp reached 32C (which is what I set as max - it carried on climbing past it.) I set the Min at 27C

I hope this all makes sense to you.

Again - thank you, thank you, thank you for your help. Sorry for the long post!

Sorry that's a bit confusing. Lol

What exactly do the white cords run too? Are they going to a plug in the wall?

I found this and it looks right to me.
t50SmAQ6.jpeg


This is yours.

IMG_20180508_100901.jpeg
#1 is your power going in from the wall.
#2 is you hot wire (your brown wire) for the CHE.
#3 is where the bridge from #1 to #3 should go. (You can use white wire if you want just know it's hot)
#4 should be the two neutral wires.

What I am confused about is what your two white wires are.if the do go to a plug you will need to know which is hot and which is the neutral.
 

Tidgy's Dad

Well-Known Member
5 Year Member
Joined
Feb 11, 2015
Messages
48,539
Location (City and/or State)
Fes, Morocco
You are sweet for introducing us
I hope that your recovery is going ok
Hello, and a most welcomey welcome welcoming to you. :<3::)
Has the One-Legged Pirate been being nice to you?
And the Roommates?
Fancy a coffee?
I'll be bringing lots of cheese soon, but it may be a month or three.
 

Tidgy's Dad

Well-Known Member
5 Year Member
Joined
Feb 11, 2015
Messages
48,539
Location (City and/or State)
Fes, Morocco
I am back from my PTSD session. I am nowhere near as exhausted as I was last week. Old memories are already becoming just that rather than stuff I stress about.

He wants to take me into pain management and looking forward on the next session
Glad it went well. :)
That in itself will help!
 

CarolM

Well-Known Member
5 Year Member
Joined
Oct 30, 2017
Messages
19,492
Location (City and/or State)
South Africa - Cape Town
Sorry that's a bit confusing. Lol

What exactly do the white cords run too? Are they going to a plug in the wall?

I found this and it looks right to me.
View attachment 237999


This is yours.

View attachment 238000
#1 is your power going in from the wall.
#2 is you hot wire (your brown wire) for the CHE.
#3 is where the bridge from #1 to #3 should go. (You can use white wire if you want just know it's hot)
#4 should be the two neutral wires.

What I am confused about is what your two white wires are.if the do go to a plug you will need to know which is hot and which is the neutral.
You are an absolute STAR. I could kiss you right now. I will go to the hardware store and get wiring just like in your picture and then wire it exactly like that. The white was going to the plug - electrical power. But totally wrong. But I think that I would rather get wiring exactly as in the pic and do it that way. Then it should be right. I am so Happy right now. Did I say I could Kiss you?:<3::):<3::):<3::):<3:
 

Tidgy's Dad

Well-Known Member
5 Year Member
Joined
Feb 11, 2015
Messages
48,539
Location (City and/or State)
Fes, Morocco
I don’t have anything interesting to share either. I read to catch up and say hello. I’m kind of invisible.

I would love to see your new pond you finished a while ago. How’s it doing?
I love the stories of the football games and your photos, holidays, tales of your weight watchers and so on.
Not invisible at all, Kathy! :):<3:
 
Top