How to install T5 tubes

maythetortbewithyou

New Member
Joined
Jan 20, 2025
Messages
3
Location (City and/or State)
Leeds
Hello, new member and first time poster here, I have recently been made aware that mecury vapour bulbs are not the best for my tort and that T5 tubes (for uvb) with a separate bulb (for heat) are better.

My question is: how do you guys suspend these above your torts table? And do the light fixtures come with obvious holes for screws etc…

Thanks so much guys, this forum has already helped me to give our boy some much needed improvements!
 

Tom

The Dog Trainer
10 Year Member!
Platinum Tortoise Club
Joined
Jan 9, 2010
Messages
68,449
Location (City and/or State)
Southern California
Hello, new member and first time poster here, I have recently been made aware that mecury vapour bulbs are not the best for my tort and that T5 tubes (for uvb) with a separate bulb (for heat) are better.

My question is: how do you guys suspend these above your torts table? And do the light fixtures come with obvious holes for screws etc…

Thanks so much guys, this forum has already helped me to give our boy some much needed improvements!
You can build an overhead support for the from 2x4s, PVC pipe, or you can buy two ZooMed light stands.

Most people screw the little clips that come with the fixtures into the ceiling of the enclosure and then push the light fixture into the clips. Alternatively, I have screwed the clips to a piece of 1x2, screwed some coffee cup holder hooks into the 1x2, and then suspended the fixture from some light chain. Like this:
IMG_5902.jpg

IMG_5908 copy.jpg
 

maythetortbewithyou

New Member
Joined
Jan 20, 2025
Messages
3
Location (City and/or State)
Leeds
You can build an overhead support for the from 2x4s, PVC pipe, or you can buy two ZooMed light stands.

Most people screw the little clips that come with the fixtures into the ceiling of the enclosure and then push the light fixture into the clips. Alternatively, I have screwed the clips to a piece of 1x2, screwed some coffee cup holder hooks into the 1x2, and then suspended the fixture from some light chain. Like this:
View attachment 386793

View attachment 386792
Thank you very much for your reply! The images are really helpful for me
 

Littleredfootbigredheart

Well-Known Member
Joined
Dec 28, 2023
Messages
7,679
Location (City and/or State)
UK
There’s some visuals at the bottom of here too if you’re interested😊

 

maythetortbewithyou

New Member
Joined
Jan 20, 2025
Messages
3
Location (City and/or State)
Leeds
There’s some visuals at the bottom of here too if you’re interested😊

Wow! So much helpful information. After reading this I will also be changing my boy’s substrate. Thank you 🙏
 

New Posts

Top